Purple Illusion Silver Mirror Primer with Transparent Topcoat Powder Coating for Decoration

• Customization: Available
• CAS No.: 51852-81-4
• Color: Purple
• Model NO.: Purple Illusion Powder Coating
• Appearance: Powder
• Main Raw Material: Polyester
• Paint Film Property: Powder Coating
• Method: Spray
• Level: Primer+Topcoat
• Category: Heat Cured Coating
• Certification: ISO9001, RoHS
• Substrate: Aluminum
• Components: Polyester
• Formation Mechanism: Conversion Type
• Curing Temperature: 200ºC
• Curing Time: 10min
• Particle Size(D50): D50=25-35um
• Particle Size(D10): D10≥9um
• Transport Package: 20kg/Box
• Specification: 41cm/26.5cm/38.5cm
• Trademark: IRIDIA
• Origin: China
• HS Code: 3907910000
• Production Capacity: 8000tons/Year
• Package Size: 41.00cm * 26.50cm * 38.50cm
• Package Gross Weight: 20.000kg

Product Description

High Performance Powder Coating 

Suzhou Yaolida New Material Technology Co., Ltd., specializes in overseas sales, ensuring international support for clients.Position IRIDIA as the brand for overseas promotion.

Product Advantages:
1.Full Spectrum Coverage: 5000+ colors including epoxy, polyester, hybrid, PU & acrylic systems
2.Custom Color Engineering:
·Standard colors (RAL, Pantone)
·Specialty finishes: Candy color, Illusion color, bonding metallic effects, sand texture finish
·Standard Specification(AAMA 2603,AAMA 2604,ISO9001)

Prep/Pretreatment

1.Remove all coatings, oils, and contaminants from the substrate with either a chemical stripper (B17, Rim-Strip, Jem-Strip 427) or a degreasing agent
(Brake Parts Cleaner, or Simple Green);these are some examples of chemical strippers and degreasers that work well depending on the condition of the substrate.

2.Plug/mask off any areas that you do not want to be coated. Improper masking on certain mechanical parts or mating surfaces may cause tolerance on functionality issues.

3.A sand-blasted profile is highly recommended for the substrate to remove any rust, scale, or other coatings. This is also a crucial step to ensure maximum coating adhesion. For best results, blast at 80 - 100PSI using a 100-mesh dry grit material such as aluminum oxide or garnet sand.

4.Fixture part(s) to allow for the best view and application access; this can be done by using support hooks and support wires. Makke sure to place part(s) in such a way that they will not bump into each other. Ensure the part(s) being hung have a clean metal-to-metal contact point with thehooks, rack, and the part(s) themselves. This is imperative to complete aproper earth-ground connection via cold electrostatic spray application.

5.Blow off the substrate with a high-pressure air nozzle to remove any
sandblasting media/dust left on the surface. Work in a well-ventilated area and always wear proper Personal Protective Equipment (PPE), e.g., safety goggles and respirator.

6.We recommend but do not require, that parts are placed in an oven at 450°F (232°C) for approximately 30 minutes. This will aid in discharging part(s) that have developed any static charge and evaporate any surface moisture or solvents from degreasing. If contaminates are drawn to the surface during this phase, the affected areas will need to be addressed. 

Application

1.Confirm all ground connections are properly made before the application begins. As mentioned above, a true earth-ground connection is always
considered as best practice.
2.Adjust your gun's settings to provide an adequate powder cloud that is not projecting too much powder but also not too little. You will be looking to verify
that the spray gun does not surge while the trigger is pulled. If it does, additional gun/hopper adjustments will need to be made.
3.In some instances, a gun system will come with multiple nozzle options (conical, fan, & castle). These nozzles will alter the powder path in different
ways and can be advantageous for specific coating scenarios.
4.Depending on the gun system being used, you may be forced to pre-heat parts to achieve adequate coverage. This tends to be more common on second-coat applications. If you find yourself in this scenario,we recommend the part metal temperature to be no more than 160°F. While 'Hot Flocking' at temperatures higher than this is common within the industry, we don't recommend it for beginner applicators.

5.Once you believe adequate coverage has been achieved, we recommend utilizing a light source to check over your work. Add additional coating if
needed.

Technical Data Information

As with all powder coatings, this product may vary between lot numbers, KV settings, mil thickness, oven temperatures, application equipment and technique. We recormmend a clear topcoat to maintain the appearance and
prevent oxidation on metallic powder coatings.Always coat a sample before any production to determine if this product meets all your requirements.

Illusion Cherry Color

Customer Application

Wheel application

Technical Specifications

Type	Thermosetting Powder Coating
Powder Type	Polyester(Contains TGIC)
Gloss	>85 Gloss Unit
Recommended Use	Exterior/Interior
Adhension/Crosshatch	5B
Mandrel Bend	98% Resistance
Indirect Impact	70 inch·pounds
Pencil Hardness	2H
Specific Gravity	1.4±0.1
Storage	Store in a cool, dry environment(20℃)
Shelf Life	6-8 Months

Company Profile

Suzhou Yaolida New Material Technology Co., Ltd.

As a leading powder coating solutions provider with 20+ years of expertise, Jiangsu Chameleon Micro Powder Technology Co., Ltd. delivers innovative products and end-to-end services globally. Our subsidiary, Suzhou Yaolida New Material Technology Co., Ltd., specializes in overseas sales, ensuring seamless international support for clients.Position IRIDIA as the brand for overseas promotion.

Why Choose Us?

Other Products

OEM/ODM capabilities
Competitive pricing & bulk discounts
Fast shipping & customs clearance support
Dedicated team for cutting-edge powder coating formulations

Insulation & Corrosion Protection Powder Coatings
Hyper-Hardness Powder Coatings
Anti-Static Powder Coatings
High-Temperature Resistant Powder Coatings
Liquid Paint like Powder Coating

FAQ

1.MOQ :
A:The general product's minimum order is 500kgs,each color ≥ 100kgs.
 
2.Colors:
A:RAL and Pantone color: We usually use RAL colors that are widely used in the paint industry and are easily found in the market. Custom color: Color matching is available. If you have colors panels, please send them to us for matching.
 
3.Prices:
A:Prices depend on the colors and using environment , please tell us the colors and using environment (indoor use or outdoor use).
 
4.Time of delivery :
A:Production will take about 3-5 working days after receipt of prepayment. It depends on the quantity.
 
5.Payment :
A:50% T/T prepayment , 50% T/T before shipment (or against BL) or LC at sight .
 
6.Samples:
A:Normal sample is free of cost, Special sample costs 80~200 dollars.and we will highly appreciate it if you pay for the courier charge.

7.How to ensure quality ?
A : Always provide experiment samples before mass production ; Always carry out final inspection before shipment.

8. What is your trade term?
A: Trade Term: EXW / FCA / FAS / FOB / CFR / CIF / CPT / CIP / DAT / DAP / DDP;

9. What is the delivery time and shipping method?
A: Delivery time is 3 to 15 days based on quantity. It could be shipped by sea, by air, by railway or by express (EMS, UPS, DHL, TNT, FEDEX and etc). Please confirm with us before placing orders.